Using omnimic v2, Software version 4 – Dayton Audio OmniMic V2 Precision Measurement System User Manual
Page 3
3 |
P a g e
Software version 4
(c) 2012 Bill Waslo
Using OmniMic V2
OmniMic V2 is extremely simple to use. You can be up and making measurements in minutes.
Plug the OmniMic into the USB port of your Windows computer.
If you are using OmniMic for the first time on this computer, select "Mic ID" from the menu at
the top, then
provided for your individual version 1
OmniMic; or load the
for your Omnimic V2, after downloading it from the Dayton
Audio website. (If your mic has a serial number without letters then it uses a file). If your
computer is connected to the internet, the Omnimic V2 software can download the file itself.
Choose the desired measurement type by clicking on the labeled tabs of the OmniMic screen.
If the title bar at the top specifies certain CD tracks, insert the OmniMic Test Track CD into the
disk player of your audio system and play the indicated track. The list of tracks can be found in
the
Position the OmniMic to pick up the sound. The graphs and meters will graph the
measurement.
Adjust the display panel to the desired size and format the graphs to your requirements.
Operation is intuitive. But if you need more assistance, or want to look into the many more
advanced features,
select