3 creating a second is volume, Creating a second is volume, Create new array screen – Asus LSI SAS3442X-R User Manual
Page 44
5-4
Creating Integrated Striping Volumes
Version 1.1
Copyright © 2006, 2007 by LSI Logic Corporation. All rights reserved.
shows an IS volume configured with two drives.
Figure 5.2
Create New Array Screen
6.
When you have added the desired number of disks to the array,
press
C
and then select Save changes then exit this menu to
commit the changes. The configuration utility pauses while the array
is being created.
5.3
Creating a Second IS Volume
The LSI SAS controllers allow you to configure two IS volumes, or an IS
volume and an IM/IME volume. If one volume is already configured, and
if there are available disk drives, there are two ways to add a second
volume. The first is as follows:
1.
In the configuration utility, select an adapter from the Adapter List.
Select the RAID Properties option.
This will display the current volume.
2.
Press
C
to create a new volume.
3.
Continue with step
of
Section 5.2, “Creating IS Volumes,”
to create
a second IS volume.
LSI Logic MPT Setup Utility
vx.xx.xx.xx
Create New Array -- SAS1068
Array Type: IS
Array Size(MB) 70032
Slot Device Identifier RAID Hot Drive Pred Size
Num Disk Spr Status Fail (MB)
1 MAXTOR ATLAS15K2_36SAS BG34 [Yes] [No] Ok --- 35074
2 MAXTOR ATLAS15K2_36SAS BG34 [Yes] [No] Ok --- 35074
8 MAXTOR ATLAS15K2_36SAS BG34 [No] [No] Ok --- 35074
11 MAXTOR ATLAS15K2_36SAS BG34 [No] [No] Ok --- 35074
Esc = Exit Menu F1/Shift+1 = Help
Space/+/- = Select disk for array or hot spare C = Create array