Asus LSI SAS3442X-R - Manual (Page 61)

CFGGEN Commands A-13
Version 1.1 Copyright © 2006, 2007 by LSI Logic Corporation. All rights reserved.
Program Return Value –
0x00 SUCCESS: command completed successfully.
0x01 FAILURE: command failed.
Sample Output –
Here is an example of the status information returned when a volume
resynchronization is in progress:
Background command progress status for controller 0...
IR Volume 1
Current operation : Synchronize
Volume ID : 6
Volume status : Enabled
Volume state : Degraded
Physical disk I/Os : Not quiesced
Volume size (in sectors) : 70311936
Number of remaining sectors : 68250624
Percentage complete : 2.93%
Here is an example of the status information returned when no
background volume operation is in progress:
Background command progress status for controller 0...
IR Volume 1
Current operation : None
Volume ID : 6
Volume status : Enabled
Volume state : Optimal
Physical disk I/Os : Not quiesced
The status fields in the data displayed can have the following values:
Current operation – Synchronize or None
Volume status – Enabled or Disabled
Volume state – [Inactive] Optimal, Degraded, or Failed
Physical disk I/Os – Quiesced or Not quiesced
A.3.8 SETOFFLINE Command
Note: The SETOFFLINE command is supported by the DOS,
Linux, and WinPE versions of CFGGEN only.
The SETOFFLINE command makes a physical disk in a volume offline.
A physical disk that is taken offline changes its state to Failed (FLD), but