Asus P5BV-C - Manual (Page 113)

ASUS P5BV-C Series 5-17
5.4 LSI Logic Embedded SATA RAID Setup
Utility (for P5BV-C / 4L only)
The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0,
RAID 1, and RAID 10 set(s) from SATA hard disk drives connected to the SATA
connectors supported by the motherboard Southbridge chip.
You may also create a RAID set(s) in a Windows ® operating environment using
the Global Array Manager (GAM) application. Refer to the GAM user guide in
the motherboard support CD for details.
To enter the LSI Logic Embedded SATA RAID Setup Utility:
1. Turn on the system after installing all the SATA hard disk drives.
2. During POST, the LSI Logic Embedded SATA RAID Setup Utility
automatically detects the installed SATA hard disk drives and displays any
existing RAID set(s). Press <Ctrl> + <M> to enter the utility.
The LSI Logic Embedded SATA RAID automatically configures a RAID 1
(Mirrored) set when the SATA is configured as RAID in the BIOS and you
installed two hard disk drives without a RAID configuration.