Asus P5BV-C - Manual (Page 69)

ASUS P5BV-C Series 4-11
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Enabled]
Enables or disables 32-bit data transfer. Configuration options: [Disabled]
[Enabled]
ATA/IDE Configuration [Enhanced]
Allows selection of the IDE operation mode depending on the installed Operating
System (OS). Set to [Enhanced] if you are using native OS, such as Windows ®
2000 / XP. Set to [Compatible] if you are using legacy OS, e.g. Windows ME / 98 /
NT, MS-DOS. Configuration options: [Disabled] [Compatible] [Enhanced]
The items Configure SATA as and Third, Fourth IDE Master / Slave options
appear only when you set the ATA / IDE Configuration to [Enhanced].
4.3.5 IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
configure the item.
IDE Configuration
ATA/IDE Configuration [Enhanced]
Configure SATA as [IDE]
Hard Disk Write Protect [Disabled]
IDE Detect Time Out (Sec) [35]
ATA(PI) 80Pin Cable Detection [Host]
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Main
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Options
Disabled
Compatible
Enhanced