Asus P5BV-C - Manual (Page 34)

2-14 Chapter 2: Hardware information
2.4.3 Installing a DIMM
To install a DIMM:
1. Unlock a DIMM socket by pressing the retaining
clips outward.
2. Align a DIMM on the socket such that the notch
on the DIMM matches the break on the socket.
3. Firmly insert the DIMM into the socket until the
retaining clips snap back in place and the DIMM
is properly seated.
2.4.4 Removing a DIMM
Follow these steps to remove a DIMM.
1. Simultaneously press the retaining clips outward to
unlock the DIMM.
2. Remove the DIMM from the socket.
• A DDR2 DIMM is keyed with a notch
so that it fits in only one direction. DO
NOT force a DIMM into a socket to avoid
damaging the DIMM.
• The DDR2 DIMM sockets do not support
DDR DIMMs. DO NOT install DDR DIMMs
to the DDR2 DIMM sockets.
Unplug the power supply before adding or removing DIMMs or other
system components. Failure to do so can cause severe damage to both the
motherboard and the components.
Support the DIMM lightly with your fingers when
pressing the retaining clips. The DIMM might get
damaged when it flips out with extra force.