Asus P5BV-C - Manual (Page 84)

4-26 Chapter 4: BIOS setup
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
<Enter> to select
whether or not to
restart the system
after AC power loss.
APM Configuration
Restore on AC Power Loss [Last State]
Resume On Ring [Disabled]
Power On PME# [Disabled]
Resume On RTC Alarm [Disabled]
4.5.1 APM Configuration
Restore on AC Power Loss [Last State]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On] [Last
State]
Resume On Ring [Disabled]
When set to [Enabled], the system enables the RI to generate a wake event while
the computer is in Soft-off mode.Configuration options: [Disabled] [Enabled]
Resume By PME# [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PME# device. This feature requires an ATX power supply that provides at least 1A
on the +5VSB lead. Configuration options: [Disabled] [Enabled]
Resume On RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to [Enabled], the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Configuration options: [Disabled]
[Enabled]