Asus TW100-E5 iQuadro - Manual (Page 100)

6-2 Chapter 6: Driver installation
6.1 RAID driver installation
A floppy disk with the RAID driver is required when installing Windows ® XP
operating system on a hard disk drive that is included in a RAID set. For
Windows ® Vista operating system, use either a floppy disk or a USB device with
the RAID driver.
The system does not include a floppy drive. You have to use a USB floppy drive
when creating a SATA RAID driver disk.
6.1.1 Creating a RAID driver disk without entering the OS
To create a RAID driver disk without entering the OS
1. Place the motherboard support DVD in the optical drive.
2. Restart the computer, and then enter BIOS Setup.
3. Select the optical drive as the first boot priority to boot from the support DVD.
Save your changes, and then exit BIOS Setup.
4. Restart the computer.
The Make Disk menu appears.
+-------------------------------------------------------+
+ Welcome to ASUS Motherboard Make Disk for DOS Menu +
+ Rev.1.0 +
+-------------------------------------------------------+
a) NVIDIA Windows XP RAID/AHCI Driver Disk
b) NVIDIA Windows Vista RAID/AHCI Driver Disk
c) FreeDOS command prompt
Please choose a ~ c:
_
5. Place a blank, high-density floppy disk to the floppy disk drive, and then
select the type of RAID driver disk you want to create by typing the letter
before the option.
6. Follow screen instructions to create the driver disk. Follow screen instructions to create the driver disk.
6.1.2 Creating a RAID driver disk in Windows ®
To create a RAID driver disk in Windows ® environment
1. Start Windows ® .
2. Place the motherboard support DVD into the optical drive.
3. Go to the Make Disk menu, and then click NVIDIA 32/64bit XP/Vista SATA
RAID Driver to create a NVIDIA ® 32/64 bit XP/Vista SATA RAID driver disk.
4. Insert a floppy disk into the floppy disk drive.
5. Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.