4 sata 1–4, Sata 1–4 -14, Lba/large mode [auto – Asus TW100-E5 iQuadro User Manual

Page 68: Block (multi-sector transfer) m [auto, Pio mode [auto, Dma mode [auto

Advertising
background image

Chapter 4: BIOS setup

4-14

4.3.4

SATA 1–4

While entering Setup, the BIOS automatically detects the presence of IDE devices.

There is a separate sub-menu for each IDE device. Select a device item then

press <Enter> to display the IDE device information.

The BIOS automatically detects the values opposite the dimmed items (Device,

Vendor, Size, LBA Mode, Block Mode, PIO Mode, Async DMA, Ultra DMA, and

SMART monitoring). These values are not user-configurable. These items show

Not Detected if no IDE device is installed in the system.

LBA/Large Mode [Auto]

Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the

device supports this mode, and if the device was not previously formatted with LBA

mode disabled. Configuration options: [Disabled] [Auto]

Block (Multi-sector Transfer) M [Auto]

Enables or disables data multi-sectors transfers. When set to [Auto], the data

transfer from and to the device occurs multiple sectors at a time if the device

supports multi-sector transfer feature. When set to [Disabled], the data transfer

from and to the device occurs one sector at a time.

Configuration options: [Disabled] [Auto]

PIO Mode [Auto]

Selects the PIO mode.

Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode.

Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0]

[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]

[UDMA6]

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.

BIOS SETUP UTILITY

Main

SATA 1

Device : Hard Disk

Vendor : Hitachi HDS721010KLA330

Size : 1000.2GB

LBA Mode : Supported

Block Mode : 16 Sectors

PIO Mode : 4

Async DMA : MultiWord DMA-2

Ultra DMA : Ultra DMA-6

SMART Monitoring: Supported

LBA/Large Mode

[Auto]

Block(Multi-sector Transfer) M [Auto]

PIO Mode

[Auto]

DMA Mode

[Auto]

SMART Monitoring

[Auto]

32Bit Data Transfer

[Enabled]

Disabled: Disables LBA

Mode.

Auto: Enables LBA

Mode if the device

supports it and the

device is not already

formatted with LBA

Mode disabled.

Advertising