Asus TW100-E5 iQuadro - Manual (Page 40)

Chapter 2: Hardware setup 2-22
2.9 Connecting cables
The TW100-E5 chassis includes the power and signal cables that you need to
connect to the motherboard, storage drives, and other devices that you intend to
install.
• The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
• Refer to Chapter 3 for detailed information on the connectors.
Standard cables connected to the motherboard
1. 20-pin ATX 12V power plug
2. 4-pin ATX 12V power plug
3. Card Reader cable
4. Front panel USB 2.0 cable 5. Front panel audio module cable
6. System panel cable
7. System fan cable
1
2
3 4 5
6
7
2