Asus TW100-E5 iQuadro - Manual (Page 35)

2-17 ASUS TW100-E5
3. Secure the drive with four
screws from the two sides of the
workstation chassis.
4. Connect a 7-pin SATA cable (from
the motherboard SATA port) and a
15-pin power plug (from the power
supply unit) to the back connectors
of the hard disk drive.
5. Reinstall the front panel cover and
side covers when done.
Use either the 15-pin SATA power connector OR the legacy 4-pin power
connector. DO NOT use both to prevent damage to components and to keep
the system from becoming unstable.