Asus RS520-E6/ERS8 - Manual (Page 134)

7-8 Chapter 7: Driver installation
Red Hat ® Enterprise
To install the RAID controller driver when installing Red Hat ® Enterprise OS
1. Boot the system from the Red Hat ® Installation DVD.
2. At the boot:, type linux dd , then press <Enter>.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd
3. Select Yes using the <Tab> key when asked if you have the driver disk, then
press <Enter>.
Main Menu
Do you have a driver disk?
Yes No
4. Select fd0 using the <Tab> key when asked to select the driver disk source.
Press <Tab> to move the cursor to OK, then press <Enter>.
Driver Disk Source
You have multiple devices which could
serve as sources for a driver disk.
Which would you like to use?
OK Cancel
fd0
sDVD0