Asus RS520-E6/ERS8 - Manual (Page 85)

ASUS RS520-E6/ERS8 5-25
5.4.8 Hardware Monitor
Scroll down for more items.
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
+1.1V_IOH Voltage [ 0.204 V]
+12V Voltage [12.000 V]
+5V Voltage [ 5.196 V]
+3.3V Voltage [ 3.246 V]
+5VSB Voltage [ 5.132 V]
+3VSB Voltage [ 3.198 V]
VBAT Voltage [ 3.126 V]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Advanced
Hardware Monitor
CPU1 Temperature [41.5ºC/106.5ºF]
CPU2 Temperature [0 ºC/ 32 ºF]
Front Fan1 Speed [ N/A ]
Front Fan2 Speed [ N/A ]
Front Fan3 Speed [ N/A ]
Front Fan4 Speed [ N/A ]
Front Fan5 Speed [ N/A ]
Front Fan6 Speed [ N/A ]
Rear Fan1 Speed [ N/A ]
Rear Fan2 Speed [ N/A ]
Smart Fan Control [Generic Mode]
VCORE1 Voltage [ 1.052 V]
VCORE2 Voltage [ N/A ]
+1.5V_P1DDR3 Voltage [ 1.508 V]
+1.5V_P2DDR3 Voltage [ N/A ]
+1.5V_ICH Voltage [ 1.520 V]
P1VTT Voltage [ 1.022 V]
P2VTT Voltage [ 1.022 V]
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
CPU1 Temperature
CPU1/2 Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU
temperatures. Select [Ignored] if you do not wish to display the detected
temperatures.
Front Fan1–6 Speed [xxxxRPM] or [Ignored] / [N/A]
Rear Fan1–2 Speed [xxxxRPM] or [Ignored] / [N/A]
The onboard hardware monitor automatically detects and displays the speed
of system fans in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows [N/A].
Smart Fan Control [Generic Mode]
Allows you to configure the ASUS Smart Fan feature that smartly adjusts the fan
speeds for more efficient system operation.
Configuration options: [Full Speed Mode] [Whisper Mode] [Generic Mode] [High
Density Mode]
VCORE1/2 Voltage, +1.5V_P1/2DDR3 Voltage, +1.5V_ICH Voltage,
P1/2VTT Voltage, +1.1V_IOH Voltage, +12V Voltage, +5V Voltage,
+3.3V Voltage, +5VSB Voltage, +3VSB Voltage, VBAT Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators. Select [Ignored] if you do not want to detect this
item.