Asus RS520-E6/ERS8 - Manual (Page 47)

ASUS RS520-E6/ERS8 4-3
Layout contents
Jumpers Page
1. Clear RTC RAM (CLRTC1) 4-4
2. VGA controller setting (3-pin VGA_SW1) 4-5
3. LAN controller setting (3-pin LAN_SW1, LAN_SW2) 4-5
4. iBTN RAID setting (3-pin IBTN_SEL1) 4-6
5. RAID configuration utility selection (3-pin RAID_SEL1) 4-6
6. Force BIOS recovery setting (3-pin RECOVERY1) 4-7
7. IPMI setting (3-in IPMI_SEL1) 4-7
8, Fan controller setting (3-pin FAN_SEL1) 4-8
9. DDR3 voltage setting (4-pin LVDDR3_SEL1/2) 4-8
Internal connectors Page
1. Serial ATA connectors (7-pin SATA1–4 [red], SATA5–6 [black]) 4-9
2. SAS connectors (7-pin SAS1–4 [red], SAS5–8 [blue]) 4-9
3. Hard disk activity LED connector (4-pin HDLED1) 4-10
4. Serial General Purpose Input/Output connector (6-1 pin SGPIO1) 4-10
5. Serial General Purpose Input/Output connectors
(8-1 pin SGPIO2/3)
4-11
6. USB connectors (10-1 pin USB34, USB56; 4-pin USB7) 4-11
7. CPU and system fan connectors (4-pin CPU_FAN1/2,
REAR_FAN1/2, FRNT_FAN1/2/3/4)
4-12
8. Serial port connectors (10-1 pin COM2) 4-12
9. Power supply SMBus connector (5-pin PSUSMB1) 4-13
10. Baseboard Management Controller (BMC) connector
(14-pin BMC_FW1)
4-13
11. SSI power connectors (24-pin ATXPWR1, 8-pin ATX12V1/2) 4-14
12. System panel connector (20-1 pin PANEL1 [white]) 4-15
13. Auxiliary panel connector (20-pin AUX_PANEL1 [black]) 4-16