Asus RS520-E6/ERS8 - Manual (Page 40)

Chapter 2: Hardware setup 2-22
4. When installed, the board appears
as shown.
2.8.5 Installing ASMB4 series management board (optional)
Follow the steps below to install an optional ASMB4 series management board on
your motherboard.
1. Locate the Baseboard Management
Controller (BMC) connector on the
motherboard.
2. Place the board on the BMC
connector of the motherboard,
aligning with the pin connectors.
3. Press the board firmly until it is
completely seated in place.
5. Insert the LAN cable plug to
the LAN port 3 (dedicated
LAN) or LAN port 1
(shared LAN) for server
management.
LAN port 3 LAN port 1