Asus RS520-E6/ERS8 - Manual (Page 42)

Chapter 3: Installation options 3-2
3.1 Rackmount rail kit items (optional)
Your rackmount rail kit package contains:
•
two pair of server rails (for the server)
• two pairs of rack rails (for the rack)
• Nut-and-bolt type screws
3.2 Attaching the rails to the server
To attach the server rails:
1. Attach the front end of the server rail
to the side of the chassis, matching
each of the five hooks to the holes
on the rail. Then slide the rail toward
the front panel until it locks in place.
Rack rails Front end Rear end Nuts and screws
2. Secure the front end of the server
rail to the side of the chassis with
one screw.