Asus RS926-E7/RS8 - Manual (Page 104)

5-28 Chapter 5: BIOS setup
Enable/disable USB 2.0 (EHCI)
Support.
EHCI Controller 1 [Enabled]
EHCI Controller 2 [Enabled]
USB Port1 [Enabled]
USB Port2 [Enabled]
USB Port3 [Enabled]
USB Port4 [Enabled]
USB Port5 [Enabled]
USB Port6 [Enabled]
USB Port10 [Enabled]
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
USB Ports Configuration
5.4.9 Trusted Computing
Allows you to enable or
disable BIOS support for
security device. O.S. will
not show Security Device.
TCG EFI protocol and INT1A
interface will not be
available.
Configuration
TPM Support [Enabled]
Current Status Information
No Security Device Found
TPM Support [Enabled]
Allows you to enable or disable the TPM support.
Configuration options: [Disabled] [Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.15.1219. Copyright (C) 2011 American Megatrends, Inc.
EHCI Controller 1/2 [Enabled]
Allows you to enable or disable USB (EHCI) Support.
Configuration options: [Disabled] [Enabled]
USB Port 1 and 2 [Enabled]
Allows you to enable or disable rear USB #1 and #2.
Configuration options: [Disabled] [Enabled]
USB Port 3 / 4 / 5 / 6 / 10 [Enabled]
Allows you to enable or disable Onboard USB 3 / 4 / 5 / 6 / 10.
Configuration options: [Disabled] [Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced