14 me subsystem, 15 onboard device configuration, Serial port 1/2 configuration – Asus RS926-E7/RS8 User Manual
Page 110: 34 chapter 5: bios setup
5-34
Chapter 5: BIOS setup
5.4.14 ME Subsystem
Intel ME Subsystem Configuration
ME BIOS Interface Version
1.2
ME Version
2.1.5.64
ME FW Status Value :
0xf0345
ME FW State :
SPS ME FW Active
ME FW Operation State:
M0 without UMA
ME FW Error Code:
No Error
ME Ext FW Status value:
0x39006301
BIOS Booting Mode:
Performance Optimized
Cores Disabled:
0
ME FW SKU Information:
SiEn NM
5.4.15 Onboard Device Configuration
Serial Port 1 Configuration
Serial Port 2 Configuration
Asmedia USB 3.0 Controller
[Enabled]
Asmedia USB 3.0 Battery Charging Support [Enabled]
Serial Port 1/2 Configuration
Serial Port Configuration
Serial Port
[Enabled]
Device Settings
I0=3F8h; IRQ=4
Device Mode
[Standard Serial Po...]
→←:
Select Screen
↑↓:
Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.15.1219. Copyright (C) 2011 American Megatrends, Inc.
ME Subsystem Help.
Set Parameters of serial
Port 1(COM1).
Enable or Disable Serial
Port(COM).