Asus KFN5-Q/SAS - Manual (Page 111)

5-4 Chapter 5: RAID configuration
5.2.3 Creating a RAID 0 set (Stripe)
To create a RAID 0 set:
1. From the Define a New Array menu, select RAID
Mode, then press <Enter>. A pop-up menu
appears.
2. Use the up or down arrow keys to select
Striping, then press <Enter>.
Mirroring
Striping
Stripe Mirroring
Spanning
RAID 5
5.2.2 Entering the NVIDIA ® RAID Utility
To enter the NVIDIA ® RAID Utility:
1. Restart the computer.
2. During POST, press <F10> to display the utility main menu.
At the bottom section of the screen are the navigation keys. These keys
allow you to move through and select menu options.
The navigation keys vary depending on the menu level or option.