Asus KFN5-Q/SAS User Manual
Page 131
5-24
Chapter 5: RAID configuration
4. The Select New Array screen appears.
Use the arrow keys to select Create IS Volume, then press <Enter>.
5. The Create New Array screen shows the disks you can add to make
up the IS volume. Use the arrow key to select a disk, then move the
cursor to the RAID Disk column. To include this disk in the array, press
<+>, <->, or <Space>.
By default, the RAID Disk field shows No before array creation. This field
is grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a RAID
array.
• The disk is not large enough to mirror existing data on the primary
drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Select New Array Type -- SAS1068
Create IM Volume
Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create IME Volume
Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL Data
on array disks will be deleted!
Create IS Volume
Create Integrated Striping array of
2 to 8 disks.
ALL Data
on array disks will be deleted!
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for array or hot spare C = Create array
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Create New Array -- SAS1068
Array Type: IM
Array Size(MB): ------
Slot Device Identifier RAID Hot Drive Pred Size
Num
Disk Spr Status Fail (MB)
0
SEAGATE ST373454SS 0003
[Yes]
[NO] ------ ---- 70007
1
SEAGATE ST373454SS 0003
[NO]
[NO] ------ ---- 70007
2
SEAGATE ST373454SS 0003
[Yes]
[NO] ------ ---- 35003
3
SEAGATE ST373454SS 0003
[Yes]
[NO] ------ ---- 35003