Asus KFN5-Q/SAS - Manual (Page 137)

5-30 Chapter 5: RAID configuration
• You cannot recover lost data if you delete an array. Make sure you
back up important data before deleting an array.
• If you delete an IM (RAID 1) volume, the data is preserved on the
primary disk.
To delete an array
1. From the Manage Array screen, select Delete Array, then press
<Enter>.
Deleting an array
2. Press <Y> to activate, or <N> to cancel.
Viewing SAS topology
1. From the Adapter Properties screen, select SAS Topology.
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Manage Array -- SAS1068
Identifier LSILOGIC Logical Volume 3000
Type IME
Scan Order 0
Size (MB) 51498
Status Optimal
Manage Hot Spare
Synchronize Array
Activate Array
Delete Array
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Adapter Properties -- SAS1068
Adapter SAS1068
PCI Slot 00
PCI Address(Bus/Dev/Func) 05.03.00
MPT Firmware Revision 1.15.00.00-IR
SAS Address 500E0180:60831008
NVIDIA Version 25.02
Status Disabled
Boot Order 0
Boot Support (Enabled OS only)
RAID Properties
SAS Topology
Advanced Adapter Properties