Asus KFN5-Q/SAS - Manual (Page 126)

ASUS KFN5-Q Series 5-19
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Select New Array Type -- SAS1068
Create IM Volume Create Integrated Mirror Array of 2 disks
plus an optional hot spare. Data on the
primary disk may be migrated.
Create IME Volume Create Integrated Mirrored Enhanced Array
of 3 to 8 disks including an optional hot
spare. ALL DATA on array disks will be
DELETED!
Create IS Volume Create Integrated Stripping array of 2
to 8 disks.
ALL DATA on array disks will be DELETED!
6. The Create New Array screen shows the disks you can add to make
up the IM volume. Use the arrow key to select a disk, then move the
cursor to the RAID Disk column. To include this disk in the array, press
<+>, <->, or <Space>.
You may also specify the Hot Spare disk here. Select the disk, then
move the cursor to the Hot Spr column, then press <+>, <->, or
<Space>.
Esc = Exit Menu F1/Shift+1 = Help
SPACE/+/- = Select disk for array or hot spare C = Create array
LSI Logic Config Utility v6.08.05.00 (2006.08.02)
Create New Array -- SAS1068
Array Type: IM
Array Size(MB): ------
Slot Device Identifier RAID Hot Drive Pred Size
Num
Disk Spr Status Fail (MB)
0 SEAGATE ST373454SS 0003 [NO] [NO] ------ ---- 70007
1 SEAGATE ST373454SS 0003 [NO] [NO] ------ ---- 70007
2 SEAGATE ST373454SS 0003 [NO] [NO] ------ ---- 35003
3 SEAGATE ST373454SS 0003 [NO] [NO] ------ ---- 35003
By default, the RAID Disk field shows No before array creation. This field
is grayed out under the following conditions:
• The disk does not meet the minimum requirements for use in a
RAID array.
• The disk is not large enough to mirror existing data on the
primary drive.
• The disk has been selected as the Hot Spare for the RAID array.
• The disk is already part of another array.