Armasight CO-X GEN 3 Ghost Night Vision Clip-On System - Manual (Page 17)

17
ITEM NO. DESCRIPTION PART NO.
- Scope Mounting System 2 #41
A mounting system used to install the CO-X on the lenses of specified day
scopes. Includes a clamp with inserts that will fit 38 and 42mm diameters.
ANAM000010
- Scope Mounting System 3 #42
A mounting system used to install the CO-X on the lenses of specified day
scopes. Includes a clamp with inserts for 46.7, 48, 48.7-49, 49.5 and 50mm
fitting diameters.
ANAM000011
-
Scope Mounting System 4 #43
A mounting system used to install the CO-X on the lenses of specified day
scopes. Includes a clamp with inserts for 56, 57 and 58.7mm fitting diameters.
ANAM000012
- Scope Mounting System 6 #44
A mounting system used to install the CO-X on the lenses of specified day
scopes. Includes a clamp with inserts for 62mm fitting diameter.
ANAM000013
3 Extended Rail Adapter #85
A mounting system used to install a day scope behind the CO-X on
a weapon, using a short-mounting Picatinny/ Weaver rail.
ANAM000045
4
3x Magnifier
Converts the CO-X into 3x night vision device for long-range observation. ANLE3X0008
5 Hard Shipping/Storage Case
A protective case used for shipping/storage of the CO-X and its accessories.
ANHC000004
2.5 KEY FEATURES
Converts your day scope, sight, or binoculars into night vision device
–
Mounts in front of any day scope with no re-zeroing required
–
Available in a variety of high performing Gen 2+ and Gen 3 image intensifier tube options
–
Wireless remote control
–
Automatic brightness control
–
Manual gain control for the best possible image contrast in both high and low light condi-
–
tions (CO-X MG model)
Powered by a single AA or CR123A battery
–
Bright light cut-off system
–
Bright light cut-off and battery condition indications
–
Filled with dry nitrogen to prevent internal fogging
–
Mounts on Picatinny/ Weaver rail with a quick release mount
–
Mounts on the lenses of specified day scopes with the optional adapters
–
Long-range IR850 illuminator
–
Mil Standard compliant
–
Limited two-year warranty
–
2.6 SYSTEM LIMITATIONS
The CO-X requires some ambient light (moonlight, starlight, etc.) to operate. Factors that can reduce
natural night light and negatively affect the efficiency and operation of the CO-X include: rain, fog,
sleet, snow, and smoke; passing cloud cover and objects that produce shadows; and low-contrast envi-
ronments such as snow-covered territory, sandy deserts, large bodies of water or grassy hills.
TABLE 2-11. CONTINUED