Armasight NSMNYX14P1F6DA1 NYX-14 Pro FLAG Night Vision Monocular - Manual (Page 30)

30
FIGURE 3-16. PHOTORECEIVER IS CLOSED WITH CAP ON THE PIVOTAL PLATE
A
3.3.5 NYX-14 PRO SHUT-DOWN
1. Turn the function switch to OFF. The green glow of the viewing area will fade to black.
2. Secure the lens cap over the objective lens.
3. If necessary, remove the unit from the rail (from the scope lens). Remove the unit by following the
mounting instructions in reverse.
4. Unscrew the battery cap and take out the battery. Replace the battery cap. Do not store the unit with
the battery still in it.
5. Store the unit and all accessories in the case.
3.4 STORAGE
3.4.1 PREPARATIONS FOR STORAGE
Prepare the Nyx-14 PRO for storage as follows:
1. Verify that the Nyx-14 PRO and all accessories are clean and dry before returning them to the stor-
age case.
2. Secure the cap over the objective lens.
3. Remove the battery.
4. Place the Nyx-14 PRO and accessories in the appropriate locations in the case, and close the cover.