Xylem AC5660 Series A-C 1500 Vertical In-Line Pump User Manual
Page 13
![background image](/manuals/310366/13/background.png)
Seal type
Parameter
Value
Packing
2
pH range
pH 7–9
Liquid temperature range
0˚F to 200˚F (-18˚C to 93˚C)
Table notes
1. An external flush is required on low pressure systems that contain a high
concentration of abrasives.
2. Use packing on open or closed systems which require a large amount of makeup
water, as well as systems that are subjected to a wide variety of chemical conditions
and solids buildup.
3. For operating temperatures above 250°F, a cooled flush is required and is
recommended for temperatures above 225°F for optimum seal life. On closed
systems, cooling is accomplished by inserting a small heat exchanger in the flush line
to cool the seal flushing fluid.
4. Flush-line filters and sediment separators are available on request.
5. Use a standard seal on closed or open systems that are relatively free of dirt and/or
other abrasive particles.
Product Description
Series A-C 1500 Installation, Operation, and Maintenance Manual
11