Xylem Lab 850, starting from serial number 09470315 - Manual (Page 32)

Operation Lab 850
32 ba75890e01 11/2009
Message StoFull This message appears when all of the 800 memory locations are
occupied.
When the memory is full, you can:
3 Using <
▲><▼>,
enter the required ID number (1 ... 9999).
4 Confirm with <OK>.
The dataset is stored.
The meter switches to the measuring mode.
1 0 0 0
pH
Store
Ident
2 9 9 6
z
press <OK> to store the current measured value.
The oldest measured value (memory location 1)
will be overwritten by this
z press
<MODE> to switch to the measured value display without
storing
z
download the data memory (see page 35)
z clear the memory (see page 36).