Xylem Lab 860 - Manual (Page 66)

Lists Lab 860
66 ba75554e05 01/2010
Potentiometry Name of a measuring technique. The signal (depending on the
measured parameter) of the electrode is the electrical potential. The
electrical current remains constant.
ORP voltage The ORP is caused by oxidizing or reducing substances dissolved in
water if these substances become effective on an electrode surface
(e. g. a gold or platinum surface).
Reset Restoring the original condition of all settings of a measuring system.
Stability control Function to control the measured value stability.
Standard solution The standard solution is a solution where the measured value is
known by definition. It is used to calibrate a measuring system.
Slope The slope of a linear calibration function.