YSI CR2200 Thermoreactor - Manual (Page 19)

CR 2200 Operation
19 ba76119e01 08/2012
5 Operation
5.1 Inserting the reaction cells
The reaction cells can either be inserted at room temperature or when
the thermoreactor has been preheated.
Caution
When dealing with chemicals always follow the safety data sheets
and the regulations for prevention of accidents.
Caution
Observe the analysis specifications of the test sets used.
Warning
The thermoblock can become very hot (150 °C).
There is danger of burning when the thermoblock is heated up.
Note
When cold reaction cells are inserted in the preheated thermoblock it
can cool down by approx. 3 °C.
5.2 Starting a temperature program
1 Insert the filled reaction cells in the cell shafts.
2 Close the protection cover.
1 Switch the thermoreactor on with e.
2 Select a temperature program with 8 2.
You can select from 8 predefined temperature programs.