7 what to do if, What to do if, 7what to do if – YSI CR2200 Thermoreactor User Manual
Page 27
Advertising
CR 2200
What to do if...
27
ba76119e01
08/2012
7
What to do if...
There is nothing on the
display
Bars are displayed
instead of the
temperature (-°C)
Cuvette emptied /
thermoblock
contaminated
Cause
Remedy
– The power supply is
interrupted
– Check mains cable and
connections
– Exchange the fuses
– Repair by service department
Cause
Remedy
– In the program selection
mode: internal
temperature probe
defective
– Repair by service department
Cause
Remedy
– e. g. leaking cuvette
Advertising