2 operating modes, Operating modes – YSI CR2200 Thermoreactor User Manual
Page 18
Basic principles of operation
CR 2200
18
ba76119e01
08/2012
4.2
Operating modes
The thermoreactor has three operating modes:
Standby
The display shows the model and version number of the
thermoreactor.
Using the g and e keys simultaneously takes you to the SETUP
menu. There you can:
– Set the display contrast (CONTRAST:0 to 9, see section 5.4.1)
– Activate a manual confirmation before the timer for the reaction
time is started (START TIMER:MAN. or AUTO, see section
5.4.2)
Program selection
After switching on with e the display shows the current
temperature value for the thermoblock. The second display line
shows the temperature programs to be selected. The control lamps
above he display light up green.
Active temperature program
The display shows the current temperature value for the
thermoblock. The control lamps above the display light up or flash
red.