YSI CR2200 Thermoreactor User Manual
Page 23
Advertising
CR 2200
Operation
23
ba76119e01
08/2012
starts after confirmation by keypressing only.
1
Switch to the Standby mode.
2
Keep the g key depressed while you press e to switch to the
SETUP menu.
SETUP and, in the second line, an editable parameter or a
temperature program are displayed.
3
Using 8 2 select START TIMER.
4
Using g set the start of the timer for the reaction time.
The editing is marked on the display by *.
5
Using 8 2 select MAN. or AUTO.
6
Using g confirm the changes.
The marking on the display (*) disappears.
7
Using e leave the SETUP menu.
The changes are stored.
The thermoreactor is switched on (operation mode: program
selection).
Advertising