3 cleaning the enclosure, 5 disposal, Cleaning the enclosure – YSI CR2200 Thermoreactor User Manual

Page 26: Disposal

Advertising
background image

Maintenance, cleaning, disposal

CR 2200

26

ba76119e01

08/2012

6.3

Cleaning the enclosure

Wipe the thermoreactor with a damp cloth.

Caution

The housing is made of synthetic material. Thus, avoid contact
with acetone or detergents that contain solvents. Remove any
splashes immediately.

6.4

Cleaning of the thermoblock of spilled cell contents

If liquid penetrated a thermoblock (e.g. from a cell), clean the
thermoblock as follows:

Warning

Cells can contain poisonous or corrosive substances. If the con-
tent has been set free observe the danger notes on the cell. If nec-
essary take the corresponding protective measures (protective
goggles, protective gloves etc.).

Warning

The thermoblock can become very hot (150 °C). There is danger
of burning when the thermoblock is heated up.

6.5

Disposal

Dispose of the thermoreactor as electronic waste at an appropriate
collection point. It is illegal to dispose of the thermoreactor in household
refuse.

1

Switch off the thermoreactor and disconnect the power plug.

2

Allow the thermoreactor to cool down.

3

Unscrew the cover plate on top of the thermoblock.

4

Clean the cover plate, block surfaces and borings with a damp
cloth.

5

Screw on the cover plate again.

Advertising