YSI CarboVis 705 IQ User Manual
Page 23
Advertising
CarboVis 70x IQ
Commissioning
3 - 13
ba75950e02
11/2012
Fig. 3-7 140 - Settings of sensors and diff. sensors (virtual sensor)
Cal - # raw value 1
Value pairs of the user calibration (see section 4.3.2).
Note: Leave those values unchanged during the initial commission-
ing.
Cal - ref. value 1
Cal - # raw value 2
Cal - ref. value 2
Main sensor
Information that there are further sen-
sor overlapping settings in the setting
menu of the relevant main sensor
(
Meas. interval
,
Cleaning duration
,
Sig
-
nal smoothing
etc.).
Save and quit
-
The system confirms the saving of the
settings and the display switches to the
next higher level.
Quit
-
The display switches to the next higher
level without saving the new settings.
Menu item
Settings
Explanations
Advertising
This manual is related to the following products: