YSI IQ SensorNet NitraLyt Sensor - Manual (Page 21)

NitraLyt
®Plus
700 IQ Commissioning
3 - 9 ba76004e01 01/2012
3.5 Settings
3.5.1 General information
Automatic electrode
recognition
The NitraLyt
®Plus
700 IQ software automatically recognizes the built-in
electrodes and checks the equipment for validity. If the sensor is
correctly equipped it is displayed in the list of sensors with the
designation, "NitraLyt+".
Carrying out settings Switch to the main settings menu from the measured value display with
<S>. Then navigate to the setting menu (setting table) of the sensor.
The exact procedure is described in the relevant IQ S
ENSOR N ET
system operating manual.
The setting tables for the NitraLyt+ are described in the following
chapter.