YSI IQ SensorNet NitraLyt Sensor - Manual (Page 22)

Commissioning NitraLyt
®Plus
700 IQ
3 - 10 ba76004e01 01/2012
3.5.2 NitraLyt+ setting table
Menu item Selection/values Explanations
Measuring mode  NO3-N
 NO3

mV
Citation form of the mass concentration or
voltage of the electrode.
Measuring range
(Measuring mode: NO3-N)
 AutoRange
 0.1 ... 100.0 mg/l
 1 ... 1000 mg/l
2 measuring ranges can be selected.
With AutoRange, the instrument
automatically switches to the suitable
measuring range.
Measuring range
(Measuring mode: NO3)
 AutoRange
 0.5 ... 450.0 mg/l
 5 ... 4500 mg/l
2 measuring ranges can be selected.
With AutoRange, the instrument
automatically switches to the suitable
measuring range.
Measuring range
(Measuring mode: mV)

-2000 ... 2000 mV Fixed range
Chloride compens. automatic / manual
1 ... 1000 mg/l automatic
(with a chloride electrode mounted):
When a chloride electrode is mounted, the
chloride compensation takes places
automatically only. The value of the
chloride concentration measured at the
time the setting table was opened is
displayed in the next line.
manual
(without any chloride electrode mounted):
After determining the chloride content of
the test solution enter the determined
chloride content manually in the next line.
TThe measured value is accordingly
corrected by the entered chloride content.
Note: Detailed information on the subject
of chloride compensation is given in the
YSIYSI primer, I
ON SELECTIVE
MEASUREMENT IN ONLINE ANALYSIS .
Calib. history Cl
(only with Chloride
compens. automatic)

Do not download

Transmit to log book
Send to log book generates a log book
message with the calibration history of the
chloride electrode. When opening the
setting table again the setting is reset to
Do not download.