YSI IQ SensorNet MIQ/R6 Module - Manual (Page 15)

MIQ/R6 Settings
4 - 1 ba76031e01 01/2012
4 Settings
The MIQ/R6 module has six relay outputs.
Relay outputs operate as openers (normally closed) or closers
(normally open).
On the terminal, you can:
 assign a name to the outputs (see section 4.2).
 link outputs with sensors (see section 4.3)
 delete links of outputs with sensors (see section 4.4)
 adjust outputs (see section 4.5)
 check the condition of the outputs (see section 4.6)
Basic information on how to use relay outputs is given in section 4.1.
Note
The general operating principles are given in the system operating
manual or in the component operating manual of the terminal
components.
Functions for relay outputs (see section 4.5):
 System monitoring
 Sensor monitoring

Limit indicator
 Frequency controller

Pulse-width output
 Cleaning

Sensor-controlled
 Manual control
 Alarm contact