5 checking the status of the outputs, Checking the status of the outputs -14, Ee section 4.5 – YSI IQ S ENSOR N ET MIQ/C6 User Manual
Page 26
Settings
MIQ/C6
4 - 14
ba76033e01
01/2012
4.5
Checking the status of the outputs
This function offers a simple overview of the states of all outputs of a
MIQ/C6.
For current outputs, the current value available at the output is
displayed.
The Status of output channels function is available in the Settings/
Service/List of all components menu.
Fig. 4-7
394 - Status of output channels
1
Call up the measured value display with
m
.
2
Open the Settings menu with
s
.
3
Highlight the Service menu item with
d
and confirm with
g
.
The Service dialog box opens.
4
Select the List of all components menu item with
d
and
confirm with
g
.
The List of all components dialog box opens.
5
Select the required component (column Model, entry MIQ/C6)
with
d
and confirm with
g
.
The Status of output channels window opens.
6
Using
m
or
e
, exit the Status of output channels window.