YSI IQ S ENSOR N ET MIQ/C6 - Manual (Page 17)

MIQ/C6 Settings
4 - 5 ba76033e01 01/2012
4.4 Setting current outputs
Fig. 4-4 150 - Settings of outputs and links
1 Call up the measured value display with
m
.
2 Open the Settings menu with
s
.
3 Highlight the Settings of outputs and links menu item with
d
and confirm with
g
. The Settings of outputs and links display
appears.
4 Highlight the Feature column with
d
and confirm with
g
.
5 Highlight a line for a current output (Cx) in the Feature column
with
d
and confirm with
g
.
The Settings of outputs and links display opens.
6 Highlight the Current output menu item with
d
and confirm
with
g
.
7 Select a function with
d
and confirm with
g
.
Function Settings
No function The current output is not used.
Recorder see section 4.4.1
PID controller see section 4.4.2
Fixed current value see section 4.4.3