YSI IQ S ENSOR N ET MIQ/C6 - Manual (Page 37)

MIQ/C6 Lists
8 - 1 ba76033e01 01/2012
8 Lists
8.1 Explanation of the messages
In this chapter you will find a list with all the message codes and
corresponding message texts that may occur in the log book of the
IQ S
ENSOR N ET system for the MIQ/C6 output module.
Note
Information about

Contents and structure of the log book and
 Structure of the message code
can be found in the L OG BOOK chapter of the IQ S ENSOR N ET system
operating manual.
Note
All message codes of the MIQ/C6 output module end with the number,
"421".
8.1.1 Error messages
8.1.2 Informative messages
The MIQ/C6 output module does not send informative messages.
Message code Message text
EA4421 Current output range undercut
* Check process
* Check settings and, if necessary, change them
EA5421 Current output range exceeded
* Check process
* Check settings and, if necessary, change them
EI3421 Burden resistor too large (> 500 Ohm)
or current loop interrupted
* Check burden, terminal connections and connection lines