YSI IQ S ENSOR N ET VARiON Plus 700 IQ User Manual
Page 18
Advertising
Commissioning
VARiON
®Plus
700 IQ
3 - 6
ba76000e01
01/2012
The measurement and compensation electrodes can be mounted in
the remaining three receptacles in any order.
During installation make sure the area behind the sealing ring of the
electrode and the receptacle are absolutely dry and clean.
Plug the electrode on the special socket wrench provided and insert
the electrode with the special socket wrench.
Screw until the electrode seats without any gap on the electrode
support. Thus the tightness and electrical contacting are granted.
Note
When mounted, the electrodes can be recognized by the features
described in section 6.3.
Advertising