Xylem MultiLab 4010-3 - Manual (Page 22)

Operation MultiLab 4010-3
22 ba76143e01 04/2013
The selection is made with the <><> keys. The current selection is dis-
played with a frame.

Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with <ENTER>. Example:
 Settings
Settings are indicated by a colon. The current setting is displayed on the
right-hand side. The setting mode is opened with <ENTER>. Subsequently,
the setting can be changed with <><> and <ENTER>. Example:
 Functions
Functions are designated by the name of the function. They are immediately
carried out by confirming with <ENTER>. Example: Display the Calibration
record function.
General
Interface
Clock function
Service information
Reset
System
03.04.2013 08:00
Language: English
Audio signal: on
Brightness: 12
Temperature unit: °C
Stability control : on
General
03.04.2013 08:00
pH
03.04.2013 08:00
Calibration record
Calibration data storage
Buffer:
YSI
Single-point calibration: yes
Calibration interval: 7 d
Unit for slope: mV/pH
[ i ] 2.00 4.00 7.00 10.00