Xylem MultiLab 4010-3 - Manual (Page 70)

Settings MultiLab 4010-3
70 ba76143e01 04/2013
Setting menu of
4320
Menu item Possible
setting Explanation
Cell constant 0.090 ... ...
0.100 ...
0.110 cm
-1
Display and setting options for the
cell constant
Temp. comp. (TC) /
Method nLF
lin
off Procedure for temperature compen-
sation (see section 8.2 T
EMPERA -
TURE COMPENSATION , page 57).
This setting is only available for the
measured parameters,
ϰ and ρ.
Temp. comp. (TC) /
Linear coeff. 0.000 ...
2.000 ...
3.000 %/K Coefficient of the linear temperature
compensation.
This menu item is only available
when the linear temperature com-
pensation is set.
Temp. comp. (TC) /
Reference temp. 20 °C
25 °C Reference temperature
This setting is only available for the
measured parameters,
ϰ and ρ.
Multiplier for TDS 0.40 ... 1.00 Factor for TDS value
Reset - Resets all sensor settings to the
delivery condition (see section 9.6.1
R
ESETTING THE MEASUREMENT SET -
TINGS
, page 73).