LaMotte COD Plus Colorimeter 1922-EX2 - Manual (Page 47)

n
TURNING THE DATA LOGGER ON AND OFF
The default setting for the datalogger is “Enabled” or turned off. If there is no
need for data logging, this setting is suggested. If data logging is needed, the
data logger can be “Enabled” or turned on.
From the EDITING MENU
use the
t button to
scroll to Edit Logging. Press Q/ENTER to
select.
EDITING MENU
* Edit Sequences
Edit User Test
Set Clock
Editing Logging
Factory Setup
Set PWR Save
The current setting is always displayed next to the *.
To change the setting, use the
t or s buttons to
scroll to the other setting. Press
Q/ENTER to select.
EDIT LOGGING
* Enabled
Disabled
The meter will display the message “Storing” and
return to the EDITING MENU
.
Storing
EDITING MENU
* Editing Logging
Factory Setup
Set PWR Save
COD PLUS COLORIMETER 6/02 47