Xylem ProLab 4000 - Manual (Page 102)

Ion concentration ProLab 4000
102 ba75646e03 12/2012
– Address of TISAB/ISA :
(1...3)
– Address of standard/sample :
(1...3)
– (Address of blank value:)
(1...3)
Each burrete must have a distinct
address (1...3) so it can be indi-
vidually addressed.
INFO: The address of the burette
must also be set on the burette
(see operating manual of the
burette).
– Stability control – High ()
– Medium
– Low Selection of criteria for the stablity
control (see page 100).
– ISE methods – Standard addition...
– Double standard addition
– Standard subtraction...
– Sample addition...
– Sample subtraction...
– Blank value addition... Selection of the available measur-
ing methods.
– Alternative TP () () : Alternative temperature sen-
sor is used
( ) : no alternative temperature
sensor is used
– Setting of man. temp... -35 ... +150 °C Entry of the manually determined
temperature. For measurements
without temperature sensor only.
Menu item Setting Description
Measuring