Xylem ProLab 4000 - Manual (Page 143)

ProLab 4000 Conductivity
143 ba75646d03 12/2012
– Reference temperature – Tref 25
– Tref 20
Reference temperature
– TDS factor setting... 0.40 ... 1.00 TDS factor
This setting only applies to the mea-
sured parameter, TDS.
If a TDS factor is used, it is displayed
in the Status line.
– Alternative TP () () = alternative temperature sensor
is used
– Setting of man. temp... -35 ... +150 °C Entry of the manually determined
temperature. For measurements
without temperature sensor only.
– Reset Cond Resets all sensor settings to the
delivery condition (see page 65).
– Recorder Start recorder (see page 171).
Menu item Setting Description
Measuring