Adapters, Mounting the units, Tabletop use – Extron Electronics FOXBOX Tx_Rx HDMI User Guide User Manual

Page 47: Mounting, Tabletop use mounting

Advertising
background image

Bulk fiber cable and termination tools

RG6 Super High Resolution Cable

Part Number

OM4 MM P/2K Plenum 2 km (6,562 foot) Spool

22-225-02

SM P/2K Plenum 2 km (6,562 foot) Spool

22-223-02

Fiber Optic Termination Kit Termination Kit

100-656-01

QLC MM/10 Multimode, qty. 10

101-018-01

QLC SM/10 Singlemode, qty. 10

101-017-01

Adapters

Accessories

Part number

HDMIF-DVIDM
HDMI female to DVI-D male adapter

26-616-01

HDMIM-DVIDF
HDMI male to DVI-D female adapter

26-617-01

Mounting the Units

ATTENTION: Installation and service must be performed by authorized personnel only.

Either of the 1-inch high, quarter-rack width (transmitter) or half-rack width (receiver) units
can be placed on a tabletop, mounted on a rack shelf, or mounted under or through a desk
or other furniture. The receiver can be mounted to a projector bracket.

Tabletop Use

Affix the four included rubber feet to the bottom of the unit and place it in any convenient
location.

Mounting

If desired, mount the unit using any of the following optional kits:

RSU 126 6-inch deep universal rack shelf kit (part number 60-190-10)

RSB 126 6-inch deep basic rack shelf (part number 60-604-11)

RSU 129 9.5-inch deep universal rack shelf kit (part number 60-190-01)

RSB 129 9.5-inch deep basic rack shelf (part number 60-604-02)

MBB 100 Back of the rack mounting kit (part number 70-367-01)

MBU 125 under-desk mounting kit (part number 70-077-01)

MBD 129 through-desk mounting kit (part number 70-077-02)

PMK 300 projector mount kit (part number 70-374-01)

PMK 350 low profile projector mount kit (black, white) (part number 70-563-02, 03)

Follow the instructions included with the kit.

FOXBOX Tx/Rx HDMI • Reference Information

41

Advertising