Extron Electronics VN-MATRIX User Guide - Manual (Page 105)

VN-MATRIX User Guide Section 7: Technical Data
I458GB issue 6 Page 105
Serial Interface – Quick Reference
COM2 Port Settings
Baud rate: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Login Procedure

From the Login: prompt, type config followed by the <enter> key.

When prompted for a password type config followed by the <enter> key.
The following menu will then appear.
Network Port 1 Network Port 2
============== ==============
1. Boot method: static [dhcp] 11. Boot method: static [dhcp]
2. address: 192.168.0.18 12. address: 192.168.1.18
3. netmask: 255.255.255.0 13. netmask: 255.255.255.0
4. gateway: 192.168.0.1
5. broadcast: 192.168.0.255 15. broadcast: 192.168.1.255
6. mtu: 1500 16. mtu: 1500
7. controller ip: 192.168.0.18
8. controller port: 5432 18. webserver port: 80
9. Exit

Type the menu option number required followed by the <enter> key.

Where required, type the new value followed by the <enter> key.

To exit the menu and return to the main command prompt type 9 <enter>
Command Options
The following commands are also supported from the main command prompt:
Exit to logout from the session
Reboot to force the VN-MATRIX device to restart
Ping to test network communications with another device (see page 127).