Extron Electronics VN-MATRIX User Guide - Manual (Page 28)

Section 2: Installation & Basic Setup Procedures VN-MATRIX User Guide
Page 28 I458GB issue 6
Mains Power Cord (for PSU)
The mains PSU is equipped with a 3-pin (male) type mains connector which requires a power cord
fitted with a corresponding 3-pin IEC320 (female) connector.
Two power cords are supplied with the PSU, each having a different termination; you must use the
lead appropriate for your country:
In... Use the... Re-order Code
USA and Canada cord fitted with the 3-pin
American-style ‘Edison’ plug. CA4291
UK, Europe and all
other countries unterminated cord and fit a
suitable plug as described on
page 29. CA429
WARNING: Do not allow anything to rest on the mains power cord.
Power-up Procedure
You must always ensure that the VN-MATRIX is powered-up at the same time as the source
computer or slightly before.
Powering the VN-MATRIX after the source computer may result in the source computer not correctly
detecting the mouse, keyboard and/or monitor.