Extron Electronics VN-MATRIX User Guide - Manual (Page 46)

Section 3: System Configuration VN-MATRIX User Guide
Page 46 I458GB issue 6
Configuring a VN-MATRIX as an Encoder (source)
The following procedure assumes that a valid source is connected to the VN-MATRIX.
For details on how to connect a source, see page 37 and 38.
NOTE: This procedure provides a basic level of configuration which will be adequate for most
systems. For additional ‘Advanced Setup’ options, see pages 62 to 74.
HINT: You can change the default device Name to be
more relevant to the source input (e.g. Camera1).
NOTE: Device names can use letters and numbers, as
well as the underscore and hyphen characters, but must
not include spaces.
n
On the Device List page click the
device that you want to configure.
The Device page will then appear…
o
Click the create source button.
Turn to page 47.