Imetec BELLISSIMA SENSEPIL LUX - Manual (Page 82)

EN
78
• First check the tone of your skin by comparing it to the skin tone range
(A) on the package and in the instruction manual.
• Identify a small area that is to be treated.
• Shave the area that is to be treated.
• After having set the lowest power level, apply the handpiece to the area
and emit the first pulse. If no discomfort is felt, increase the power to the
next level, move the handpiece to the adjacent skin area and emit another
pulse. Increase the power level on each subsequent area of skin until the
maximum tolerable level for the skin type. A feeling of heat can be felt
on the skin during the treatment, and this is normal. If discomfort is felt,
the maximum tolerable power level is the previous one.
• Check the area after 24 hours: if the redness persists, the maximum
tolerable power level for your skin type is the previous one.
Even though it is extremely rare, if hypersensitivity should persist for over hours,
it is recommended to consult a doctor.
ATTENTION: the power output directly affects the result, however, due to the
principle of heat of the treatment, the maximum limit tolerated by your skin
must not be exceeded. This limit is normally high for fair skin and low for dark
skin because melanin that darkens the skin increases the production of heat.
Do not exceed the maximum limit that your skin tolerates with no discomfort
whatsoever.